Embedded Files
Directions:
Step 1: Screw arm to wall using the provided (if requested) screws and drywall anchors.
Step 2: Slide the screw cover over the arm, it may be a tight fit, but it is held in place with friction/gravity.
(Make sure not to put too much downward force on the arm while installing the cover. You don't want to rip the arm out of the wall)
Step 3: Remove the white tiles shown in the images below.
Step 4: Remove the grey hollow square plate shown in the images below (set it aside, you wont need it anymore).
Step 5: Insert the ball adapter as shown in the video below.
Step 6: Replace the white tiles to lock the ball adaptor into place.
Step 7: Screw adapter ball with the set attached to the arm .
(Be careful not to over tighten it, you should be able to move the 2x4/4x4 piece with some friction)
Step 8: Adjust the set to the desired angle and balance point then tighten the ball to keep the set in place.
(Be carful that the angle is not to aggressive and ensure your set is in a safe position)
Please keep in mind that since this item is 3D printed, there might be some small imperfections.
Have a question? Have a problem? Please reach out!
[support@bp3dprintshop.com] [ 509 - 866 - 6195 ]
Size Guide:
Mini- 5in offset from wall + you can angle the set to get more room, requires 2 screws and anchors for mounting. Requires a 2x4 brick worth of "free" space on underside of the set to ensure proper mounting.
For: Jedi Star Fighters, and similar size/weight sets.
Small - 7in offset from wall + you can angle the set to get more room, requires 2 screws and anchors for mounting.
Made For: X-wing, tie fighters, Mando Starfighter and similar size/weight sets.
Large - 9in offset from wall + you can angle the set to get more room, requires 2 screws and anchors for mounting.
Made For: Imperial Cruiser (you need 2), Falcon (also you need 2), Justifier, Inquisitor Transport and other similar size weight sets.
Heavy Duty - 9in offset from the wall + you can angle the set to get more room, very solid (sturdy), requires 4 screws and anchors for mounting.
Made For: Razor crest and similar size/weight sets. The heavy duty arm can also be used with some UCS sets (*use at your own risk. It's strong, very strong but still... use good judgment).
What makes the Heavy Duty Mount, "Heavy Duty"?
What makes the Heavy Duty Mount, "Heavy Duty"?
The Heavy Duty Mount (HD) is printed in two halves laying down, then glued together in post processing. The standard Universal Wall Mounts (UWM) are printed standing up, pointing up.
Heavy Duty Mount
Heavy Duty Mount
Printing in two halves like this spread's the 3d printed layers across the length of the whole arm making it much stronger and able to support more weight. This process requires a larger print area and reduces the number of mounts that can be printed simultaneously.
Universal Wall Mount
Universal Wall Mount
Printing standing up offers standard rigidity and can support smaller/lighter sets. More UWM's can be printed at once and are not required to be glued together in post processing.
Please don't forget to leave a REVIEW! I LOVE seeing your Lego collections and how you use the stands!
Please post a photo review!
Page updated
Google Sites
Report abuse