Adjustable Wall Display Stand/Mount for Firefighter Aircraft (42152)

Directions:

Step 1: Screw arm to wall using the provided (if requested) screws and drywall anchors.

Step 2: Slide the screw cover over the arm, it may be a tight fit, but it is held in place with friction/gravity. 

(Make sure not to put too much downward force on the arm while installing the cover. You don't want to rip the arm out of the wall)

Step 3: Attach the adapter ball to the underside of the set as shown below with the included zip ties over the sets central area.

Step 4: Screw adapter ball to arm with the set attached.

Step 4: Adjust the set to the desired angle and balance point then tighten the ball to keep the set in place.

(Be carful that the angle is not to aggressive and ensure your set is in a safe position)

Please keep in mind that since this item is 3D printed, there might be some small imperfections.

Heavy Duty Mount

Universal Wall Mount