Embedded Files
Directions:
Step 1: Screw arm to wall using the provided (if requested) screws and drywall anchors.
Step 2: Slide the screw cover over the arm, it may be a tight fit, but it is held in place with friction/gravity.
(Make sure not to put too much downward force on the arm while installing the cover. You don't want to rip the arm out of the wall)
Step 3: Attach the adapter ball to the underside of the set as shown below with the included zip ties over the sets central landing gear thingy.
Step 4: Screw adapter ball to arm with the set attached.
Step 4: Adjust the set to the desired angle and balance point then tighten the ball to keep the set in place.
(Be carful that the angle is not to aggressive and ensure your set is in a safe position)
Please keep in mind that since this item is 3D printed, there might be some small imperfections.
Have a question? Have a problem? Please reach out!
[support@bp3dprintshop.com] [ 509 - 866 - 6195 ]
What makes the Heavy Duty Mount, "Heavy Duty"?
What makes the Heavy Duty Mount, "Heavy Duty"?
The Heavy Duty Mount (HD) is printed in two halves laying down, then glued together in post processing. The standard Universal Wall Mounts (UWM) are printed standing up, pointing up.
Heavy Duty Mount
Heavy Duty Mount
Printing in two halves like this spread's the 3d printed layers across the length of the whole arm making it much stronger and able to support more weight. This process requires a larger print area and reduces the number of mounts that can be printed simultaneously.
Universal Wall Mount
Universal Wall Mount
Printing standing up offers standard rigidity and can support smaller/lighter sets. More UWM's can be printed at once and are not required to be glued together in post processing.
Please don't forget to leave a REVIEW! I LOVE seeing your Lego collections and how you use the stands!
Please post a photo review!
Page updated
Google Sites
Report abuse